Black marble

Black marble is very popular in the interior. It traditionally gives status to a room without losing its style. Black marble is used not only as a floor covering, but also in products, as well as for wall cladding to create a room zoning.

However, when processing black marble, all stoneworkers face a number of the usual problems of this material. One of them is the loss of color saturation by the material itself. This happens for various reasons, and in principle it is not particularly important how exactly the stone has lost its color. It is important - how to get it back.

If the color of the stone is lost, but the polishing is preserved, the problem is solved simply - using impregnation for the stone. We use a combination of two tools Old Age General + black ink ink. With this percentage of ink should not exceed 5%. Mix in the required proportions and apply to the surface of the stone for 5 minutes. After removing the excess, which is not absorbed into the stone. Thus, we not only enhance the color and make it more saturated, but also give protection to black marble.

If, however, with the color gone and polished, then we use the mold Marmoflash General or Klindex kp92. These drugs are very actively working with marble and give a good result - a clean and rich luster.

The next problem with stone is chipped and loss of the original structure. In such cases, the restoration work using UniBlock 110 or POLIEPOXY from the Italian manufacturer General. The difference between these adhesives is that they have absorbed all the best from different compositions: frost resistance and adhesion from epoxy glue and the rate of polymerization of polyester adhesives. In addition, these adhesives are translucent, which, by adding a small amount of pigment, makes it possible to obtain the perfect shade of adhesive for restoration.

The uniqueness of POLIEPOXY also lies in the fact that the manufacturer allows you to boldly use it at fairly low temperatures - up to +5 degrees Celsius. The manufacturer guarantees that the glue retains all of its physical and chemical properties and adhesion force. This distinguishes the adhesive from other manufacturers. Indeed, in our realities, heating of workshops is often an expensive luxury, or, in principle, an unintended option.