A3 YELLOW 5 kg - crystallizer for marble
-
4 860 грн.
- Brand: Faber-Itali
| Characteristics | |
| Work material | marble, travertine, brick, ceramics, paving slabs |
| Consistency | powder |
| The weight | 5kg |
Description
Wet plishing powder for a vitreous effect
on all lime-based materials, including marble, limestone,
travertine and agglomerate marbles.
A3 YELLOW is a high-performance wet polishing powder for all types of marble and lime-based
materials in general, such as limestone, travertine, marble-cement agglomerates and marbleresin agglomerates.
Its formulation offers excellent results when it comes to the clarity and
depth of shine on the finished surface.
A3 YELLOW does not contain wax but it reacts with the
material it is applied to, boosting shine and at the same time, leaving the surface with a lasting
resistance to dirt and pedestrian traffic.
A3 YELLOW is also able to boost non-slip qualities on
dry flooring.
A3 YELLOW, like all polishing powders by Faber, will maximise the effect of the polishing
process, making the whole operation much simpler by effectively replacing the time-consuming
final steps in the mechanical polishing process.
This means it is possible for the operator not to
have to use end-stage polishing grains, which drastically cuts the time, energy, effort and the
amount of water needed to complete the polishing process.
Faber polishing powders can be used successfully both as an alternative to the finishing process
of traditional mechanical polishing, and also to restore the shine on worn surfaces in case it is
not possible to intervene directly with a mechanical polisher.
They can also be used to maintain
surface shine on a regular basis.
CHARACTERISTICS AND BENEFITS
Suitable for all types of marble and lime-based material in general.
Zero volatility wet powder: does not release dust and is not dispersed into the air
Leaves a deep vitreous shine on treated material
Depth of shine when seen against light
Does not change the surface hardness of the support
Adds excellent surface resistance to dirt
Increases surface resistance to foot traffic
Boosts non-slip qualities on dry flooring
Lasting protection against dirt and foot traffic
Top performance solution in terms of finished results
Quick and easy application
Wax free
USES
This product can be used on both indoor and outdoor surfaces.
Suitable for use on: marble, limestone; travertine; marble-cement agglomerates; marble-resin
agglomerates.
