KIT 3P QUARTZ Набор от Faber

TOP CLEANER

TOP CLEANER is a neutral pH detergent excellent for the maintenance of surfaces such as marble, quartz based agglomerate both for kitchens and for bathrooms.The product, besides being a cleaner, performs the feature of delaying limescale forming.

The product is ready to use and must be sprayed on the surface to be cleaned and later worked with a sponge or a cloth. We recommend to rinse well after leaning.Time of contact of the product must be the minimum essential for cleaning.

QUARTZ CLEANER

ACIDIC DETERGENT FOR QUARTZ DEEP CLEANING, IT REMOVES PATINAS, STAINS AND RESIDUES
Water-based detergent for extraordinary cleaning of quartz agglomerates. It acts deeply inside the textures and pores of the surface extracting dirt, stains and residues, no matter how stubborn. It's effective also against the superficial patinas caused by the traditional cleaners. Do not use on acid sensitive materials

APPLICATION: Use pure for superficial patina or subborn dirt, diluted in water 1:2 or 1:3 for less subborn dirt. Apply on the surface and brush it with a single-disc machine or brush. Let it act for 10-20 minutes while brushing it. Remove the residues with a wet-vacuum or paper towels. Rinse well with water to remove all the residues. Repeat the washing if necessary. Protect the areas not to be treated. We recommend to make a preliminary test to evaluate the resistance of the surface. Read the Technical Data Sheet.

ENHANCER

SOLVENT BASED, STAIN-PROOF WET-LOOK COLOUR ENHANCING IMPREGNATOR, MATT FINISH

Solvent based, stain-proof treatment with colour enhancing features, for low-absorbent materials. It gives hydro-oleo phobic features, it enhances the colour and tone of the material with a matt-finish. It protects form stains, water absorption and dirt build-up. It makes ordinary maintenance easier. Food-contact safe. Specific for compact and low-absorbent surfaces. APPLICATION: Use undiluted on a perfectly clean and dry surface. Apply a thin and omogeneous layer with a lambswool applicator, roller, brush or a white pad. Wait about 10 minutes and remove all the residues from the surface using a cloth, paper towel or white pad. If necessary, apply a second coat. Wait at least 3 hours before walking on it. Don't wash for 24 hours after the application. Protect the areas not to be treated. We suggest to make a preliminary test to evaluate the final result. Read the Technical Data Sheet