HYPERLEVI 500 TOP HyperGrinder от Klindex - grinding machine

HYPERLEVI 500 TOP HyperGrinder by Klindex

The HYPERLEVI 500 TOP Hyper Grinder is a combination of the two legendary Klindex Levigator 600 and Klindex Levigator MAX.

HG engineers designed unique equipment, a compact polishing machine with a 220 volt network connection, with the possibility of turning into a single-disk polisher for floor cleaning or crystallization. The working surface when grinding the floor is 500 mm (Klindex Levigator MAX = 530 mm, 380 volts), and the gearbox of the polishing machine itself is equipped with metal gears, which makes it not killed, as in the Levigator MAX. And the diameter of the diamond tool is 200 mm, which is 40 mm smaller than the Levigator MAX and 100 mm larger than the Levigator 600 !!! You get the smallest size and versatility of a Levigator 600 with connection to 220 with the performance and reliability of a large Klindex Levigator MAX.

The engineers also took into account the wishes of workers who directly operate this equipment at the facilities and made truly convenient solutions.

- the angle of inclination of the working handle changes to any angle due to the use of a hydraulic piston, and not as in the Klindex Levigator 600 only in certain positions.

- the handle itself is made of a stronger impact resistant material, and the shape of the handle itself is also changed. The possibility of lateral grip for the convenience of crystallization.

- the tank is increased by 10% and amounts to 20 liters, which makes it less likely to fill it with water and save time at work. Also increased the hole to fill the tank.

- in the gearbox, the plastic gears were replaced with metal gears that were not killed.

Specifications:

Power, W - 2900;

Voltage 220 V

Drive - gearbox with metal gears;

Speed, rpm - shaft 200 (planetary satellite 1200);

Weight, kg - 112;

Working compartment, mm - 500

Benefits:

Increasing the weight of the grinder using the additional load system, the working weight of the grinder of the machine can be increased to 160 kg, which allows you to process granite floors.

Changing the speed using planetary gears You can get the speed of surface treatment from 200 to 2000 rpm.

Universal Floor Grinder

Using the HYPERLEVI 500 TOP grinder, you can polish, grind, burchard, wash, remove the old coating.

Compactness, dimensions of the HYPERLEVI 500 TOP grinder allow you to transport the car in the trunk of a station wagon

Good balance

Convenient operation: the convenient control handle allows you to adjust the height of the grinder to suit the operator’s height.

An electronic sensor protects against overload.

Quick change of planetary gears and diamond discs

Possibility of collaboration with industrial vacuum cleaners of the SuperVak KY 50/60 series.