Tenax Quartz Extraclean Pro is specially formulated for all types of quartz-containing stones, quartz agglomerates, quartzite.
Tenax has introduced a new line of quartz stone care products that take great care of the prolonged use of your products.
Solvent based cleaner specially formulated to remove greasy dirt and additives from stoves. Quartz Extraclean Pro penetrates the material and removes existing stains.
Application method - with a rag, mop.
We recommend using Quartz Extraclean Pro to remove improperly applied impregnations on rough, sanded, burnt and aged surfaces.
IMPORTANT: when the surface is first processed, we recommend checking QUARTZ Extraclean Pro on a sample of the material.
Close and seal the QUARTZ Extraclean Pro can after use
Application area:
As a rule, this cleaner is used for quartz stone, agglomerate on a quartz base, artificial stone. Perfectly cleans the product from oil, water, grease.
Often used to treat countertops, bathrooms, kitchen workstations, incoming groups, window sills.
Features:
- Quartz cleaner
- Easy to apply
-
Using the Tenax Quartz Toner impregnation, you can notice the water-repellent effect after applying the product to the surface in the first 10-15 minutes.
The product is easy to apply, allows you to deeply penetrate the pores of the stone and achieve maximum effect. With proper care of the product, the hydrophobic properties will last for about a year (1-2).
If time has passed and you notice that the effect is going away, we recommend updating the protection by reopening.
A hydrophobe works by soaking the top layers of quartz and does not form a film on its surface. Check in an inconspicuous area before using the product.
Application method:
At the beginning of the work, it is necessary to clean the stone from dust and dirt.
Allow the stone to dry after washing.
When working, use special clothing and gloves, glasses.
On previously cleaned stone, dry apply a small amount of cleaner with a brush, roller or rag and spread evenly over the entire surface.
Wait 15-20 minutes, let the substance work on the stone.
Wash off with water.
If the cleaner did not remove everything from the first try, we recommend repeating the procedure.
For a deeper penetration of the cleaner, you can make a compress with the cleaner.
Recommendations:
- Further operation is possible in 24 hours.
- Use only original containers. Never pour the product into other metal or glass containers.
- Use special clothing when working.
- Do not drink the product.
- In case of contact with eyes, rinse with warm water and consult a doctor if necessary.
