Recommended for all kind of stone materials. Fast-acting and effective on all kind of dirt of organic and greasy nature. It can be also applied on the surface of polished marbles without undesired effects (shine modification); waxy films on surface can be partially removed.
Available in viscous form for application on vertical surfaces, stone, bricks and plaster, building façades of stone buildings, marble, granite, ceramic tiles.
FUNCTION DEGREASER, ALKALINE SOLVENT-BASED DETERGENT
LINE CLEANING PROFESSIONAL
INDICATIONS
Recommended for all types of grease soiling: spots, grease, pollution, smoke stains, lamp-black, wax coating, etc.
MATERIALS
ALL KIND OF MATERIAL EXCEPT RUBBER AND SYNTHETICS
HOW TO USE
- It can be used undiluted on heavy soil and for deep cleaning. For routine use, dilute at 5-15% in water solution (0,5-1,5 liters of NEUTREX in 10 liters of water). Let the product work 10-15 minutes avoiding the surface dries completely. Rub vigorously with rag, brush or non-abrasive pad. Repeat the operation if necessary.
- Rinse by clear water. 2 to 3 rinsings may be needed if a protecting agents or an impregnator/sealer must be subsequently applied.
COMPOSITION Contains ionic and anionic surfactants biodegradable >90%, mix of sequestering agents, glycolethers and polar solvents. Active ingredients over 30%
TECHNICAL INFORMATION
Consumption varies according to the intensity of soiling and kind of surface.
Effect always a preliminary test in a small part of the surface to check compatibility and effect and to determine the best dilution.
NOTES
Slightly foaming alkaline detergent. Wearing impermeable gloves is recommended.
For more information about safety see product label or the Material Safety Data Sheet.
IMPORTANT
- For deep cleaning, apply with stroking motion using plastic bristle brush. The best results will be obtained by using buffing machine with soft, non-abrasive, pad.
- The solvents contained into the product can remove pre-existing treatments. In case of doubt, before using the product, always effect a preliminary test on a small part of the area to be treated to verify the compatibility of the product with the material.
| Characteristics | |
| Work material | marble, granite, travertine, sandstone, brick, onyx |
| Consistency | liqido |
| Manufacturer country | Italy |
| Volume | 1L |
