Toner 1L Tenax Protective impregnation and toning for marble, garnet, quartz

  • 2 992.50грн.

Characteristics
Work material quarzo agglomerate, quarzoite
Colour transparent
Consistency liqido
Manufacturer country
Volume 1L


Description

Toner - Reviving water-oil-repellent protective treatment - solvent based - treated surface suitable for food contact
Color enhancer sealer – solvent based – treated surface suitable for food contact High-performance product for protection and toning, high yield and easy to use
apply, with food contact. Toner is a protective and surface treatment reviver to be applied on marble, granite, natural stone, quartz agglomerate and in some cases also on ceramics. Can be used on polished, polished, sandblasted, brushed, flamed or rough. The product can be applied on floors kitchen as it meets the requirements of suitability for food contact.
High-performance sealer for protection and tonalization, high yield and easy to apply, with food contact. Toner is a protective and revitalizing surface treatment to be applied on marble, granite, natural stone, quartz agglomerate and in some cases also on ceramics. It can be used on shiny, polished, sandblasted, brushed, flamed
or rough surfaces. The product can be applied on kitchen countertops as it meets the requirements of suitability for food contact.
Features:
 
  • Impregnation of quartz
  • Protects against water, oil, grease, coffee
  • Permitted contact with food
  • Suitable for products unpolished ends
  • It enhances the color of the stone
  • Conceals small scratches on the surface of quartz
  • Resistant to UV
  • Easily applied
 
Using impregnation Tenax Quartz Toner water-repellent effect, you may notice after applying the tool to the surface in the first 10-15 minutes, very easy to apply, it allows to penetrate deeply into the pores of the stone and to achieve maximum effect. With the right care product, hydrophobic properties will be stored for about a year (1-2). If time has passed and you notice that the effect goes away, be sure to update the protection of re-opening. Gidrofob works by impregnating quartz and the upper layers do not form a film on the surface thereof. Before using the product, check on an inconspicuous area.
 
Application method:
 
  1. The work must be started to carry out cleaning of stone dust, dirt and other funds treated.
  2. Allow to dry after washing stone (preferably 24 hours).
  3. When the use of special clothing and gloves, sunglasses.
  4. On pre-cleaned stone, dry, apply a small amount of impregnation with a brush, roller or cloth and spread evenly over the entire surface.
  5. Wait 15-20 minutes to soak the stone.
  6. In case if the surface were a surplus, clean them with a clean cloth or spread on the neighboring plot.
  7. Recommended to protect the stone in 2 layers. The second coat should be applied after 2 hours, if you have a porous stone to repeat the process until the upper layers do not stop to absorb.
  8. First you will see the effect in 3-6 hours. Cured protector 24 hours.
 
Recommendations:
  • Further operation is possible after 24 hours.
  • Use only the original containers. Never pour the product into another metal or glass containers.
  • Use at work spets.odezhdu.
  • Do not drink the remedy.
  • In case you got into eyes, rinse with warm water and seek medical advice if necessary.