Protection Hydrex TENAX 1L

The protective agent for marble, granite Hydrex TENAX 1l

 

Has water, dirt-repellent effect protects against stains after coffee, oil, wine. Suitable for indoor and outdoor use (table tops, work surfaces, entrances, floors, stairs, terraces). Use this as a rule gidropellent for marble, granite, sandstone, concrete surfaces, natural and artificial stone.

   

Features:

 

A vapor permeable means does not form a film

Protects against water, oil, coffee, wine

Do not change the color of the stone

Resistant to UV

Hydrophobic properties appear after applying means to the surface, due to its composition and the formula is easy to apply, it allows to penetrate deeply into the pores of the stone and to achieve maximum effect.

 

Protective means operates by impregnating the stone and the upper layers do not form a film on the surface. Before using the product, check on an inconspicuous area especially for the most delicate materials, such as marble, sandstone and slate.

 

The treated surface does not change the natural transpiration and permeability of the material. For highly absorbent materials, apply a second layer of a few hours to fix the effect.

 

Application method:

 

Pre-clean the surface of the excess glue, dust, dirt.

Let dry stone, after day.

Use gloves.

 On a clean, dry stone, apply a small amount of impregnation with a brush, roller and cloth and spread evenly over the entire surface.

Within 15-20 minutes, let propitatsya stone.

In case if the surface were a surplus, remove them with a cloth, or spread on the neighboring plot.

Recommended to protect the stone in 2 layers. The second coat should be applied after 2 hours, if you have a porous stone to repeat the process until the upper layers do not stop to absorb.

Cured protector 24 hours. Further operation is possible after 24 hours.

Use only the original containers. Never pour the product into another metal or glass containers.