P 147 Black 1L impregnating, colour-enhancing, stain-proof, and wet-look

  • 3 360 грн.

Characteristics
Work material agglomerate resin-marble, agglomerate resin-quartz, basaltina, lava stone, ceramic, ceramic glazed, clinker, granite, porcelain gres lappato, porcelain gres honed, porcelain gres natural, porcelain gres structured, limestone, marble, travertine
Consistency liqido
The weight 1L

Description

P 147 BLACK – this is useful for impergnation, coloring, thickening (barking) the color and protecting against stains based on breakers. Vin is used to color color (“wet effect”) and tone correction (black color), including on sanding, absorbent and highly clay-prone surfaces, non-creasing surface molten coatings that allow stone dihati. P 147 BLACK is cured for processing materials with a medium and medium-high level of polishing.

P 147 BLACK miraculously protects against stains, and also makes cleaning easier.


VARIABLES

  • UV resistance
  • Certified, safe for staining on surfaces that come into contact with food products
  • After processing, careful inspection of surfaces becomes easier
  • Enhances color, color


Method of application


  1. Before applying the product, it is necessary to undergo a preliminary test on a non-marked part or on a non-corrosive fragment of the material in order to evaluate the result of the treatment.
  2. Apply an even ball of the product to a clean, dry surface using whatever tool you use to create an even ball to cover the entire surface that is being deposited.
  3. Approximately 5-10 minutes after application, proceed to re-application (dividing the impergnate), using the same tool that was used for the first application, recontouring so that the impergnate is evenly distributed on the surface.
  4. Approximately 20-30 coats after application, carefully remove any excess from the surface of the material, which should be sanded, re-finished, so that all excess is removed, in order to avoid any possible appearance of traces on the surface. material (stone, tiles). This operation is completed: on the bench with the help of paper towels, microfiber; on large surfaces (substrates) with the help of a polisher, nylon pads; on the walls using a hand polisher and white nylon pads.
  5. To maximize the effectiveness of stain protection and intensity of color enhancement, you can apply more than 20-30 layers, up to a maximum of 45-60 layers before removing excess, to allow the product to penetrate deeply into the middle more extensive materials. In this way, the surface excess can be removed a little more easily.