P 147 PLUS 250ml impregnating, colour-enhancing, stain-proof, and wet-look

Solvent-based, impregnating, colour-enhancing, stain-proof, and matt wet-look, non-filming treatment for all absorbent surfaces.

P147 PLUS is a solvent-based, impregnating, colour-enhancing, stain-proof and wet-look non-filming treatment. It is used to enhance the colour and tone of absorbent surfaces, adding a matt finish without creating a surface film. P147 PLUS is recommended for treating natural stone, agglomerates, cotto and terracotta, and all materials with a medium-low, medium and medium-high level of absorption.

Compared to traditional wet-look colour enhancers, P147 PLUS penetrates deep into the materials without creating a surface film and it is extremely simple to apply without the risk of uneven aesthetic finishes. P147 PLUS thanks to these characteristics, is specifically indicated to be used outdoors or on surfaces that due to their nature, need to withstand conditions with continued presence of water, such as showers, fountains and washbasins. It has a lasting effect, can withstand UV rays and the elements and will not yellow if exposed to sunlight.

P147 PLUS confers excellent water-repellent and stain-proof qualities, making daily cleaning and maintenance of treated surfaces easier. It is also certified for use with foods and therefore, it can be used as a stain-proof, colour-enhancing treatment on kitchen worktops.

Method of application:

1. Clean the stones from old splashes, pour glue and stains.
2. Allow the stone to dry, preferably for a day.
3. A small amount of wounded at sea, granite for additional rags, brushes, rags.
4. Wait 15-20 minutes for the impregnation to soak into the stone.
5. After that, if there are any remains that have not been absorbed, remove them with the help of a rag.
6. It is recommended to place the stone correctly in 2 layers.