DEEP ENHANCER Black 1L impregnating, colour-enhancing, stain-proof, and wet-look

DEEP ENHANCER Black

A solvent-based impregnation agent, improves and saturates (colors) the color, protects against stains, does not form a film, for matte and glossy surfaces, for dense low-absorbing materials that have lost their black color

DEEP ENHANCER Black is a solvent-based impregnation agent, improves and saturates (colors) the color, protects against stains for dense low-absorbing materials. It is used to improve the color and correct the tone (saturates with black color) on denser materials, such as natural polished stones (marble, granite, basalt, labradorite, quartzite and others), ceramics, porcelain stoneware, quartz agglomerate.

ADVANTAGES

• UV-resistant, non-yellowing
• Intensifies black color
• Certified, safe for use on surfaces in contact with food
• After treatment, facilitates daily surface care

USE

This product can be used on both interior and exterior surfaces. Suitable for use on black and graphite stones such as: granite, limestone, marble, travertine, antique ceramics, glazed ceramics, marble resin agglomerate, quartz resin agglomerate, polished porcelain tiles, natural porcelain tiles, textured porcelain tiles, basalt, as well as clinker, concrete, concrete tiles, concrete-based agglomerates, terrazzo.

CONSUMPTION

20/30 m2/l

APPLICATION EQUIPMENT

Brush, microfibre applicator (mop), roller, cloth, airless spray

Surface preparation

• Carefully clean the surface, removing dust and dirt
• Never apply DEEP ENHANCER Black to a wet or damp surface.
• Apply DEEP ENHANCER Black to a surface with a temperature between +5 and +40°C
• It is necessary to protect any surfaces in the immediate vicinity of the surface to be treated

Application method

1. Before applying the product, it is MANDATORY to SHAKE to obtain a homogeneous mixture, and to carry out a preliminary test on an inconspicuous area or an unused fragment of the material to evaluate the result of the product.
2. Apply an even layer of the product to a clean, dry surface using the tool of your choice, creating a layer to cover the entire surface to be treated.
3. Approximately 5-10 minutes after application, proceed with the re-application (distribution of the impregnation) using the same tool used for the initial application, making sure that the impregnation is evenly distributed on the surface.
4. Approximately 20-30 minutes after application, carefully remove all residues from the surface of the material to be treated, making sure that all excess is removed to prevent any possible traces on the surface of the material (stone, tiles). This operation is carried out: on countertops using paper towels, microfiber; on large surfaces (floors) using a polishing pad, nylon pads; on walls using a hand-held polishing machine and white nylon pads.
5. To maximize the effectiveness of stain protection and the intensity of the color enhancer, you can wait longer than 20-30 minutes, up to a maximum of 45-60 minutes before removing the residue, to allow the product to penetrate deep into the interior of denser materials. Therefore, surface residue may be a little more difficult to remove.

Drying time

The product dries quickly, within 1-2 hours after application. Surface use 4-6 hours after application. Wash 24 hours after application