IDEA QUARZO 250 ml Bellinzoni Protective impregnation for quartz, quartz agglomerate, porcelain stoneware

IDEA QUARZO

Solvent-based, penetrating stain-repellent and revitalizing protector formulated with nanotechnology. Suitable for treating all engineered stone, quartz-resin, stoneware, synthetic stone, and marble-resin materials. Protects surfaces, kitchen countertops, and bathroom vanity tops from penetrating water and moisture stains, oils, greases, and animal fats without leaving a surface film. It reduces the formation of mold and mildew, while protecting the material from freeze-thaw cycles and efflorescence. Highly recommended for treating dull or faded surfaces to restore their original color. UV-resistant. PFAS-free - Formulated without the addition of PFAS

Category: Protective impregnations. Hydrophobic agents

Tag: "pearlescent effect", blocks efflorescence, anti-stain agent, does not create a film, natural effect

Brand: BELLINZONI

How to use:

Before applying, test the product on an inconspicuous area of ​​the stone according to the instructions below. Ensure surfaces to be treated are completely dry and clean, free from dirt, dust, grime and scale. Cover and protect all surrounding areas not to be treated.

Hand application: Product is ready to use. Apply one coat evenly to the stone using a soft brush, microfiber cloth, sponge applicator or roller. Allow to penetrate the surface for 5 minutes before applying a second coat (if necessary). Distribute and remove any excess product, puddles within 15 minutes with a clean cotton cloth, dry roller or microfiber cloth until all excess product is absorbed.

Airless/Spray application: Apply product with a low-pressure hand sprayer or airless equipment from a distance of 20-25 cm (8-10 inches) from the surface. Allow the product to penetrate before applying the second coat as described above. On vertical surfaces, apply two coats of product using the wet-on-wet method. Start from the bottom and work upwards. Dry the treated surface and remove any drips. Place a tarpaulin or plastic sheet under the treated surface to protect the horizontal surface.

Note: When applying, the product must be applied to materials with a temperature between 10°C and 30°C. Before applying to heated floors, turn off the heating and let the floor cool completely.

Store the product in its original packaging. Always test the product beforehand.

Consumption:

On polished or textured quartz resin surfaces, engineered stone, and marble/resin: 50m2

(*) depending on the number of coats and the porosity of the surface.

Packaging:

Available in the following sizes: 250 ml, 1 l, 5 l, 25 l.