BELLINZONI IDEA GOLD 250 ml Protective impregnation for marble, granite

IDEA GOLD

High-performance solvent-based nanotechnology protector, stain-resistant, water-repellent, oil-repellent and strengthening. The product can be applied to both polished and textured and rough materials. It does not change the natural color of the material's surface and does not create a film. Protects materials from moisture and water stains, as well as from oil and grease penetration. Reduces mold growth and protects the stone from freeze-thaw cycles and efflorescence.

Category: Protective impregnations. Hydrophobic agents

Tag: "pearlescent effect", blocks efflorescence, anti-stain agent, does not create a film, natural effect

Brand: BELLINZONI

How to use:

Before applying, test the product on an inconspicuous area of ​​the stone according to the instructions below. Ensure surfaces to be treated are completely dry and clean, free from dirt, dust, grime and scale. Cover and protect all surrounding areas not to be treated.

Hand application: Product is ready to use. Apply one coat evenly to the stone using a soft brush, microfiber cloth, sponge applicator or roller. Allow to penetrate the surface for 5 minutes before applying a second coat (if necessary). Distribute and remove any excess product, puddles within 15 minutes with a clean cotton cloth, dry roller or microfiber cloth until all excess product is absorbed.

Airless/Spray application: Apply product with a low-pressure hand sprayer or airless equipment from a distance of 20-25 cm (8-10 inches) from the surface. Allow the product to penetrate before applying the second coat as described above. On vertical surfaces, apply two coats of product using the wet-on-wet method. Start from the bottom and work upwards. Dry the treated surface and remove any drips. Place a tarpaulin or plastic sheet under the treated surface to protect the horizontal surface.

Note: When applying, the product must be applied to materials with a temperature between 10°C and 30°C. Before applying to heated floors, turn off the heating and let the floor cool completely.

Store the product in its original packaging. Always test the product beforehand.

Consumption:

Marble, granite and terrazzo 15/25 m²*

Limestone, sandstone, marble/concrete 10/15 m²*

(*) depending on the number of coats, surface texture and porosity.

Packaging:

Available in the following sizes: 250 ml, 1 l, 5 l, 25 l.