AGER FS 1L TENAX Premium impregnation for protection, toning and durability for marble and granite "wet effect"

Ager FS is a solvent-based stain-resistant toner suitable for marble, travertine, stone, granite and quartz agglomerates when a "wet" effect is desired for both interior and exterior use. It is recommended to apply the product on surfaces that are untreated, sandblasted, brushed, burned or smoothed to obtain a wet effect for a long time. The product has excellent water- and oil-repellent properties of treated surfaces and does not turn yellow in the sun. Ager, in fact, penetrates and fixes itself in the microporosity of the material, which provides a constant wet effect. It also provides good anti-graffiti power. Approved for food contact.

Ager FS is a solvent based color seepage sealant suitable for marble, travertine, stone, granite and quartz agglomerates when you want a 'wet' effect for both indoor and outdoor use. It is advisable to apply the product on untreated, sandblasted, brushed, burned or polished surfaces to obtain a long-lasting moisture effect. The product provides excellent water- and oil-repellent properties to treated surfaces and does not turn yellow in the sun. Ager, in fact, penetrates and fixes itself in the microporosity of the material, which provides a constant wet effect. It also gives good anti-graffiti power. Approved for food contact.

Hydrorepellent AGER FS 1l also protects the surface from stains, oil, water, and graffiti. Therefore, it is an excellent option for the protection of the tabletop, because it has a wide range of protections.

Features:

· Protects against water, oil, grease, coffee

· Gives a "wet effect" to the treated surface of the stone

· Vapor permeable agent, does not form a film

· Suitable for the kitchen surface

· Resistant to UV

Method of application:

Clean the stone from old dirt, glue residues and stains.

Allow the stone to dry, preferably within a day.

Apply a small amount on marble, granite with a rag or brush.

Wait 15-20 minutes for the impregnation to soak into the stone.

After that, if there are any remaining residues that have not been absorbed, remove them with a cloth.

We recommend to process the stone in 2 layers to enhance the effect

Consumption: 1 l - 20 / 40 m2 (depending on the porosity of the stone)