POWDER FOR MARBLE DIAMANTINA 1kg

  • 894 грн.

Characteristics
Work material мрамор, агломерат, оникс, травертин
Colour white
Consistency powder
The weight 1kg

Description

POWDER FOR MARBLE RENEWAL
Suitable for all soft and delicate natural stones that can be easily scratched and marked or can lose the original shine and gloss. DIAMANTINA is the ideal product for soft marbles such as Portugal pink, Carrara, Onix, Thassos etc. Thanks to its very high abrasive power and the thin grain size distribution it is possible to achieve a perfect mechanical polishing having the same hardness of the stone and the treatment results stable and long lasting. The absolute absence of polishing matters of chemical nature, particularly the oxalic acid, makes the product totally safe for the user health and avoid, also to the more unskilful user, the making of unaesthetic “burnings” on the surface caused by the oxalic acid. Also a little manual skilfulness can be easily removed imperfections and small marks from the surface restoring the original shine and gloss
FUNCTION Removal of imperfections and small marks from the polished surface.
LINE HOUSE RESTORATION and MAINTENANCE
INDICATION Recovery of soft marbles restoring the original shine
MATERIALS Soft marbles such as: Portugal pink, Carrara, Thassos, etc…
HOW TO USE
  1. Pour 30-60 gr. (1-2 spoons) of product every square meter of surface. The polishing operation must be effected by a polishing machine with low rotating speed (1000-2000 rpm) equipped with a merinos-wool felt. Put a little water on the powder to obtain a mixture of doughy consistence and, putting the felt of the polishing machine on the paste compound, start with the polishing operation. Work only few square meters each time.
  2. The friction causes the water evaporation and with the drying of the floor the marble get shining. A coating of product remains on the floor. By a cotton cloth remove it from a small part of the surface to check and verify the shine grade. If necessary, repeat the operation.
  3. Once the polishing operation is over, remove from the surface the residual coating of product by washing with Neutrex diluted 1:5 (1 part of Neutrex and 5 parts of water) and after rinse with clear water.
  4. After drying (24-48 hours) the treatment of the floor by Imperston Natura is suggested to preserve the shine and to avoid the seepage of stain of oils, foodstuffs dirt, juices, fruit etc…
TEST: A preliminary test on a small part of the surface to determine the consumption per square meter, the final aesthetic result ,etc., is suggested.
COMPOSITION: Polishing mineral powders
TECHNICAL DATA: The consumption can be considered 30 to 60 g/m² about.
STABILITY: Stored in dry place, in original closed containers, at room temperature of 15-25°C (59-77°F), the product is stable.
NOTE: Neutrex and Imperston Natura are products of GENERAL® cleaning and protection line.
IMPORTANT
On wide surfaces the best results are obtained by using heavy professional machines able to develop a high friction. It is possible anyway the use of normal single-brush machines, eventually ballasted to make them more heavy, The use of single-brush machine is particularly suitable for the restoration and the renewal of the shine on old floors.