A2MIX 5 kg - crystallizer for marble

A2 MIX is a high-performance powder for wet polishing of all types of marble and lime-based materials in general, such as limestone, travertine, marble-cement agglomerates, and marble-resin agglomerates. Its formulation offers excellent results when it comes to the clarity and depth of shine on the finished surface, which features a deep vitreous effect. A2 MIX is wax free and reacts with the material to which it is applied, boosting shine and leaving a vitreous finished surface. At the same time, it gives treated surfaces a good, long-lasting level of resistance to dirt and foot traffic.

A2 MIX, like all polishing powders by Faber, will maximise the effect of the polishing process, making the whole operation much simpler by effectively replacing the time-consuming final steps in the mechanical polishing process. This means it is possible for the operator not to have to use end-stage polishing grains, which drastically cuts the time, energy, effort and the amount of water needed to complete the polishing process.

CHARACTERISTICS AND BENEFITS

ü    Suitable for all types of marble and lime-based material in general.

ü    Zero volatility wet powder: does not release dust and  is not dispersed into the air

ü    Leaves a deep vitreous shine on treated material

ü    Depth of shine when seen against light

ü    Does not change the surface hardness of the support

ü    Adds excellent surface resistance to dirt

ü    Increases surface resistance to foot traffic

ü    Lasting protection against dirt and foot traffic

ü    Top performance solution in terms of finished results

ü    Quick and easy application

ü    Wax free

USES

This product can be used on both indoor and outdoor surfaces.

Suitable for use on: marble, limestone; travertine; marble-cement agglomerates; marble-resin agglomerates.

COVERAGE

For surface polishing: 40/50 m²/kg

For surface maintenance: 50/100 m²/kg