SUPER CRYSTAL POWER MARMO 5kg Bellinzoni Crystallizer for marble, limestone, terrazzo

SUPER CRYSTAL POWDER MARBLE

Polishing powder for the final polishing or re-polishing of marble, engineered marble, marble cement, terrazzo, and limestone floors. This product is only effective on calcareous materials. SUPER CRYSTAL hardens the surface and protects it from scratches and scuffs, providing a long-lasting shine and restoring the material's beauty. It is ideal for restoring floors worn by time or traffic. SUPER CRYSTAL also hardens surfaces subject to heavy traffic.

How to use:

1. Manually distribute the SUPER CRISTAL powder over the floor in a circular motion, covering an area of ​​approximately 2 m2. Place a single-brush machine or sander equipped with a natural fiber disc over the powder.
2. Wet the floor with water using the machine's tank or use a sprayer. If necessary, add powder or water to the floor. The resulting cream may spread around the work area, so we recommend paying attention to carpets, rugs, walls, furniture, etc. and covering them with plastic film if necessary to protect them.
3. The work surface should be approximately 1-2 m2 at a time. DO NOT LET THE "CREAM" OF WATER AND DUST DRY ON THE FLOOR FOR ANY REASON.
4. After passing the machine 3-4 times over the 1-2 m2 surface area, remove the "cream" with a wet vacuum cleaner or squeegee to check the level of polish. Once the desired shine is achieved, move to another area to be treated.
5. Rinse the entire floor thoroughly, ensuring that all traces of dust or sludge have been removed from the floor, especially from the joints.
6. If necessary, repeat the treatment until the desired shine is achieved.
7. Rinse the entire floor with clean water and an alkaline cleaner such as ULTRA STRIPPER, and let it dry.

Product Coverage:

1 kg of product can polish 40-50 m² of material, depending on the degree of wear of the floor.