A1 GREY 5 kg - crystallizer for marble

  • 4 275.00грн.

A1 GREY

Natural-effect polishing powder for delicate marble surfaces and lime-based materials with a high sensitivity to acid.

A1 GREY is a high-performance polishing powder with a formula that is completely wax free andlow in acid content. 

A1 GREY can be used to polish delicate marble surfaces and all of those materials that are particularly sensitive to acids and which otherwise are at risk of developing

an “orange peel-effect” finish following the use of aggressive products. 

A1 GREY reacts with the material to which it is applied, boosting shine. 

At the same time, it gives treated surfaces a good, long-lasting level of resistance to dirt and foot traffic. 

This product can achieve perfectly polished surfaces on more delicate materials, without creating blemishes or compromising aesthetic results. 

A1 GREY can be used on all materials that cannot be polished using acid-based or aggressive products. 

It also offers excellent results on all lime-based surfaces.

A1 GREY, like all polishing powders by Faber, will maximise the effect of the polishing process, making the whole operation much simpler by effectively replacing the time-consuming finalsteps in the mechanical polishing process. 

This means it is possible for the operator not to have to use end-stage polishing grains, which drastically cuts the time, energy, effort and the amountof water needed to complete the polishing process.

Faber polishing powders can be used successfully both as an alternative to the finishing process of traditional mechanical polishing, and also to restore the shine on worn surfaces in case it is

not possible to intervene directly with a mechanical polisher. 

They can also be used to maintain surface shine on a regular basis.


CHARACTERISTICS AND BENEFITS

Leaves a great depth of shine on treated surfaces

Versatile solution: ideal for sensitive materials but also suitable for use on all limebased surfaces

Does not change the surface hardness of the support

Adds excellent surface resistance to dirt

Increases surface resistance to foot traffic

Lasting protection against dirt and foot traffic

Top performance solution in terms of finished results

Quick and easy application

Wax free


USES

This product can be used on both indoor and outdoor surfaces.

Suitable for use on: marble, limestone; travertine; marble-cement agglomerates; marble-resin

agglomerates.

A1 GREY is particularly recommended for use on more acid-sensitive marble surfaces, such as:

red marbles, red Verona marble, Bardiglio marble, etc. 

Characteristics
Work material marble, travertine, brick, ceramics, paving slabs
Consistency powder
The weight 5kg