What glue is best for gluing marble (stone)?

To answer the question more correctly it is necessary to clarify the kind of work

1. If the problem is in the filling of the cavity or filling the joint between the marble slabs used glue - paste on poliefirnomGENERAL © VERTICAL or epoxy based EPOXYGLASS using pigments (if necessary).

2. If it is necessary to carry out reinforcement, filling cracks or very small defects (a pinhead) used liquid epoxy polyester KKW and two component systems EPOXYGLASS fluido or EPOXY EXTRACTR, which allow it the glue to penetrate deeply into the pores and cracks of stone.

3. Profile pasting requires medium between liquid and thick adhesive for opportunities to put glue on the stone, so that it is not tech, and thus it is impossible to was very thick, because it is necessary to squeeze the maximum stone clamps to minimize seam. For this ideal epoxy-polyester kleyPOLIEPOXY (adhesive gel consistency, which is well pigmented and with the addition of hardener in the glue of his "releases" it becomes creamy, that allows convenient work with glue).

At the same time all the physical and chemical characteristics as the epoxy glue (its reliability, adhesion, the use of the street), as well as the properties of the polyester adhesives Fast curing (hardening) adhesives.

It is also possible to apply thick polyester VERTICAL adhesive with a small amount of liquid in these two-component polyester adhesives KKW to obtain the necessary consistency for you.