PREMIUM THASSOS 1L Tenax

PREMIUM THASSOS  1L Tenax

PREMIUM THASSOS  is a high viscosity white thixotropic mastic for bonding and repairing white surfaces,

  such as Thassos and Carrara as well as similar stones.

Very easy to mix and apply.

The hardened mastic becomes very shiny and easily polished.

After 24 hours, the fully cured product is pure white. Resistant to sunligh

Instructions for use

Make sure the marble to be treated is dry, clean and free of dust.

Take the required amount of glue from the container

and add liquid catalyst 2-3% by weight.

Mix thoroughly before use.

Do not return unused glue to jars.

  If necessary, for color correction, use dyes for glue.

Add color before the liquid catalyst, match the shade and then add the catalyst.

Too much color can affect the final result.

TECHNICAL DATA

Viscosity cP 25°C 20 rpm (ASTM D2196) Thixotropic paste

Density at 25°C g/cm³ 1.1

Appearance White thixotropic paste

Adhesive/hardener ratio 100+2/3

Gel time (in mass) at 25°C, 10-12 min

Thin layer peel off at 25°C 2 hours

Recommended working time at 25°C Approx. 3 hours

Minimum reaction temperature 0°C

Minimum use temperature after curing 0°C

Maximum use temperature after curing +110°C

Adhesion test ASTM D 4541

Adhesive strength in MPa at 25°C on Carrara marble

(diamond cut surface) after 24 hours at MPa 8.3

Bond strength in MPa at 25°C on carrara

marble surface diamond cut) after full curing 7.7

Safety regulations

Resin and hardener are chemical products, so read the safety data sheet and the rules on the label on the package before use.