T-BOND 1L Tenax

T-BOND 1L Tenax

Transparent mastic T-BOND is used for gluing and pouring marble, granite and other natural stones. Very easy to mix and

applied. Excellent paintability and application on vertical surfaces. The main characteristics are optimum transparency and low

yellowing, even when using different ratios of hardener to paste. The catalyzed product is smooth, slightly matte

and polishes very well.

Instructions for use

  Before applying, make sure that the marble to be treated is clean and free of dust.

Take the required amount of adhesive from the container and add the hardener to the paste 2-3% by weight.

Mix thoroughly and start using.

Do not return unused glue to the jar.

Add dye before hardener, select shade and

then add hardener.

Too much color can affect the final result.

glue characteristics.

TECHNICAL DATA

Viscosity cP 25°C 20 rpm (ASTM D2196) Soft thixotropic paste

Density at 25°C g/cm³ 1.1

Appearance Yellowish paste

Adhesive/hardener ratio 100+2/3

Gel time (in bulk) at 25°C, 6-8 min

Peel off in a thin layer at 25°C in 35 - 40 min

Recommended working time at 25°C Approx. 150 – 180 min

Minimum reaction temperature 5°C

Minimum use temperature after curing 0°C

Maximum use temperature after curing +110°C

Adhesion test ASTM D 4541

Adhesive strength at 25°C of botticino marble

(diamond cut surface) after 6 hours in MPa 9.5

Adhesive strength at 25°C of botticino marble

(diamond cut surface) after 24 hours in MPa 10.0

Safety regulations

The mastic and the hardener in the paste are chemical products, please read the safety data sheet and the rules indicated on the container label before use.