CALACATTA White 1L Tenax

CALACATTA White 1L Tenax

CALACATTA-White mastic is used for gluing and filling marble, granite and other white natural stones.

The main advantage is that it retains its white color even

when used in different ratios of hardener to glue. The catalyzed product is smooth, slightly matte and polishes very well.

It is easily tinted in the desired shade with dyes for glue.

Instructions for use

Before applying the product, make sure that the material

clean and free from dust. Take with

container the required amount of putty that you

are going to use, add 2-3% hardener

paste, mix thoroughly and proceed to use.

Never return the mixed mastic with the catalyst to the container.

TECHNICAL DATA

Viscosity cP 25°C 20 rpm ASTM D2196) Soft thixotropic paste

Density at 25°C g/cm 1.2

Appearance White paste

The ratio of mastic + hardener is 100+2/3

Gelation time in the mass at 25 ° C, 6-8 min

The time to unstick in a thin layer at 25 ° C, about 40 - 50 minutes

The recommended working time at 25°C is approximately 150-180 minutes

The minimum reaction temperature is 5°C

The minimum temperature of use after curing is 0°C

The maximum temperature of use after hardening is +110°C

Stability when stored at 18-25 ° C for 6 months

ASTM D 4541 Adhesion Test

Adhesion strength in MPa at 25°C on marble with a break after 6 hours 9.5

Adhesion strength in MPa at 25°C on Botticino marble with rupture after 24 hours 10.0