Solido Tassos W Premium Nuetro 1L Tenax Polyester transparent thick glue

  • 1 831 грн.

Characteristics
Work material marble, onyx, granite, travertine
Manufacturer country Italy
Volume 1L

Description

Solido Tassos W Premium Nuetro Tenax- two-component polyester adhesive, transparent color. Suitable for bonding bright natural stones, marble, onyx, travertine, granite. Due to its gel-like consistency can easily fill in the seams in the bright marble Karara, crystal stones, onyx. It is resistant to ultraviolet rays.
 
use:
 
  • for restoration work on the light colored marble
  • grouting
  • for filling cavities stone
  • for bonding the individual elements
  • for sealing of natural and artificial stone
 
 
Features:
 
  • transparent glue
  • complete polymerization occurs within days
  • resistant to UV
  • easily colored with any color
 
 
Application area:
 
Two-component adhesive is used for internal work, for gluing in the planes, for the restoration work for the sealing of joints, filling the pores and cavities.
 
Use Method:
 
  1. Prepare the stone before beginning work, remove excess pre, clean, dry.
  2. Mix the base adhesive and hardener in the correct proportions (100g 2-3gram and hardener)
  3. Mix well the resulting mixture.
  4. Work with glue at a temperature range of-400C ot100S
  5. The resulting mixture develop for 10-25 minutes depending on the ambient temperature.
  6. If you want to use on tinted Glue special dyes for adhesives Color Base General
  7. Tinted glue needed before adding hardener.
 
 
Recommendations:
 
  • Use electronic scales when working with glue to withstand the exact proportion.
  • By adding more hardener - glue loses its physicochemical properties (becomes more brittle).
  • During operation, we recommend the use of protective gloves, goggles, spets.odezhdu.
  • The polyester adhesive is designed for internal use only.
  • The more add hardener in the glue (recommended increasing the proportion), the adhesion decreases, the curing process is increased.
  • With increasing proportions of the hardener more than 3% - properties of the drug is lost, the adhesive becomes more brittle.
  • The adhesive should be applied in small layers, as as well as any adhesive shrinks to 2.3%, as a result of adhesion and curing process.