Quarzo Optical white 1L Tenax Two-component adhesive for quartz

Two-component adhesive for quartz Quarzo Tenax 1L - polyester two-component adhesive for bonding in the planes, spackling, restoration work is designed to work with artificial stone, quartz. New glue line actuators intended for operation with quartzite, as well as artificial stone. wide color palette, which will facilitate the selection of the necessary glue you created for convenience. Adhesives suitable for filling cavities extends well into the pores of the stone and does not form on its surface or excess shrinkage. Clay perfectly polished, does not stick.

   

Material handling:

 

artificial stone, quartz conglomerates

 

Packing: 1 liter

 

Application area:

 

Two-component adhesive is used for internal work, for gluing in the planes, for the restoration work for the sealing of joints, filling the pores and cavities.

 

Use Method:

 

Prepare the stone before beginning work, remove excess pre, clean, dry.

Mix the base adhesive and hardener in the correct proportions (100g 2-3gram and hardener)

Mix well the resulting mixture.

Work with glue at a temperature range of-400C ot100S

The resulting mixture develop for 10-25 minutes depending on the ambient temperature.

 

 

Recommendations:

 

Use electronic scales when working with glue to withstand the exact proportion.

By adding more hardener - glue loses its physicochemical properties (becomes more brittle).

During operation, we recommend the use of protective gloves, goggles, spets.odezhdu.

The polyester adhesive is designed for internal use only.

The more add hardener in the glue (recommended increasing the proportion), the adhesion decreases, the curing process is increased.

With increasing proportions of the hardener more than 3% - properties of the drug is lost, the adhesive becomes more brittle.

The adhesive should be applied in small layers, as as well as any adhesive shrinks to 2.3%, as a result of adhesion and curing process.

Store in original container.