Polyester-epoxy adhesive for marble, granite VIGOR TENAX transparent milk 1L

  • 1 678 грн.

Characteristics
Colour transparent, milk
Consistency gel
Volume 1L

Description

 Vigor TENAX epoxy-polyester special adhesive
 
Line POLIEPOXY
 
Function EPOXY-POLYESTER SPECIAL ADHESIVE for MARBLE, GRANITE, STONE
 
Materials MARBLE, GRANITE, STONE
 
How to use
 
  1. For best results mix 2% to 3% of the catalyst (dibenzoyl peroxide in special formulation) with the adhesive.
  2. The paste formula makes easy to measure. A homogeneous mixing will facilitate uniform catalysis. The catalysis speed is influenced by the temperature and by the proportion/quantity of catalyst. An excess of hardener/catalyst will increase the hardening speed, but weakens the adhesive seal. The surfaces to be treated/glued must be clean and dry and greasy substance free; porosity and a light roughness of the surface favour the best adhesion.
  3. The hardened/cured adhesive is completely workable (grinding, polishing, sanding, buffing, etc.) after 2 to 5 hours.
Packaging
 
1l
 
Characteristics
 
FOR MORE INFORMATIONS ASKING TECHNICAL DATA SHEET
 
Important
  • A PRELIMINARY TEST IN A SMALL, HIDDEN, AREA IS RECOMMENDED BEFORE THE APPLICATION.
  • USE ONLY ORIGINAL CONTAINERS;NEVER POUR THE PRODUCT INTO OTHER METAL OR GLASS CONTAINERS.
  • VIGOR adhesive/glue must be kept in the original tins/cans in cool and dry place and sheltered from sunlight. Under these conditions it is stable 6 months. The stability is reduced when stored at temperatures higher than 30°C (86°F)
 
TENAX® VIGOR is a two-component adhesive based on epoxy-polyester resins, which is suitable for indoor and outdoor applications, since it has the physicochemical properties of epoxy resins and the pour point of polyester glue. A big plus of this glue is the ability to conduct work and installation at low temperature, which is very important in the winter. It is perfectly polished, does not stick after hardening. It is well tinted in the color you need under the shade of your stone.
 
 
TENAX® VIGOR has a transparent milk color. It is suitable for any color of stone, if necessary, perfectly pigmented in the right shade. The mixture can easily penetrate into the cavities and fill them without forming excess on the surface of the gluing, and also without shrinkage.