Epoxy-polyester adhesive for marble, granite GENERAL® POLIEPOXY black 250ml

  • 459 грн.

Characteristics
Work material marble, granite, ceramics
Colour black
Consistency gel
Manufacturer country Italy
Volume 0,25L

Description

POLIEPOXY TRASPARENTE VERTICALE epoxy-polyester special adhesive
 
Line POLIEPOXY
 
Function EPOXY-POLYESTER SPECIAL ADHESIVE for MARBLE, GRANITE, STONE
 
Materials MARBLE, GRANITE, STONE
 
How to use
 
  1. For best results mix 2% to 3% of the catalyst (dibenzoyl peroxide in special formulation) with the adhesive.
  2. The paste formula makes easy to measure. A homogeneous mixing will facilitate uniform catalysis. The catalysis speed is influenced by the temperature and by the proportion/quantity of catalyst. An excess of hardener/catalyst will increase the hardening speed, but weakens the adhesive seal. The surfaces to be treated/glued must be clean and dry and greasy substance free; porosity and a light roughness of the surface favour the best adhesion.
  3. The hardened/cured adhesive is completely workable (grinding, polishing, sanding, buffing, etc.) after 2 to 5 hours.
Packaging
 
250-500ml L.1
 
Characteristics
 
FOR MORE INFORMATIONS ASKING TECHNICAL DATA SHEET
 
Important
  • A PRELIMINARY TEST IN A SMALL, HIDDEN, AREA IS RECOMMENDED BEFORE THE APPLICATION.
  • USE ONLY ORIGINAL CONTAINERS;NEVER POUR THE PRODUCT INTO OTHER METAL OR GLASS CONTAINERS.
  • POLIEPOXY® adhesive/glue must be kept in the original tins/cans in cool and dry place and sheltered from sunlight. Under these conditions it is stable 6 months. The stability is reduced when stored at temperatures higher than 30°C (86°F)
 
GENERAL® POLIEPOXY - two-component adhesive based on epoxy-polyester resin that is suitable for interior and exterior use, as it has, the physico-chemical properties of epoxy resins and polyester adhesive solidification speed. A big plus is the ability of the adhesive to carry out works and installations at low temperature, which is very important in the winter. It is well polished, not sticky after curing. Good tinted to desired color shade under your stone.
 
During operation with the addition of hardener in the glue, it changes its consistency with the "gel" to "creamy", which allows for more subtle restoration work, minimize the size of the joints. The mixture can easily penetrate into the cavities and fill them without forming excess glue on the surface, and preventing shrinkage.