EPOX PREMIUM 1.5kg Bellinzoni frost-resistant epoxy glue transparent-milky

EPOX PREMIUM

A two-component epoxy mastic suitable for bonding, grouting various types of granite, marble and stone, including porcelain, sintered stone, and even very hard and crystalline materials, where polyester-based mastics sometimes have no adhesion. Thanks to its excellent adhesion, it allows you to grout and repair even large defects on valuable objects that would otherwise be thrown away. Weatherproof and very resistant to solvents, alkalis, acids and even sea water. It practically does not shrink and allows you to carry out even large repairs in a single application, without volatile organic compounds. Ideal for vertical bonding. Particularly suitable for vertical grouting. The liquid version is suitable for grouting granite or hard floors before polishing. It can also be used as a filler to seal cracks, defects or holes. The special formula contains UV filters. This allows the product to be used in situations where a transparent resin is required. It is also ideal for bonding stone to various materials such as glass or plexiglass, or to honeycomb or lightweight panels.

Features:

• frost-resistant adhesive
• suitable for exterior and interior work
• first setting 20 minutes
• strong
• transparent shade
• good polishability

Instructions for use:

1. The parts to be bonded or filled must be clean, perfectly dry and dust-free; if possible, sand them lightly.
2. Mix the two components in a ratio of 2 parts component "A" + 1 part component "B". Use a small amount of product from the can to avoid a rapid reaction and the risk of "mass effect" (very rapid hardening of the entire resin). For a good result, 250 to 350 grams per catalyst are sufficient.
3. The prepared mixture has a pot life (20-30 minutes at 20°C), which will be longer at lower ambient temperatures and shorter at higher temperatures.
4. After 6-7 hours (at 20°C) the bonded parts can be moved and after 14-16 hours (at 20°C) they can be sanded.
5. The mastic hardens completely after 7 days (at 20°C). Do not apply the product at temperatures below 10°C.